Home > Support > Knowledge Base and Known Issues > Network Name Cannot be Found at SVault.Client.WebDrive.UI.WNetSDK.Connect

Network Name Cannot be Found at SVault.Client.WebDrive.UI.WNetSDK.Connect

Table of contents

Overview

Error: The network name cannot be found at SVault.Client.WebDrive.UI.WNetSDK.Connect

 

This error message typically displays due to one of the following issues:

  • You changed your SmartVault password, but the Windows cache has not cleared the old password.
  • The web client service is not running and needs to be restarted.

Resolution

To resolve this issue, restart the web client service on your computer.

 

To restart the web client service on your computer:

  1. Right-click on the Computer icon on your computer desktop, and then click Manage.

    Alternatively, if you're using Windows 8, or you cannot locate the Computer icon on your desktop, press the Windows Logo key+R to open the Run Dialog box. Type in services.msc and press Enter.

    DT_Run_Dialog_Services_Web_Client.png

     
  2. In the left pane, expand Services and Applications.
  3. In the center pane, scroll down to WebClient.

    DT_Services_Web_Client.png
     
  4. Right-click WebClient and then perform one of the following actions:
    • If the WebClient service status is Started, click Stop.
    • If the WebClient service status is stopped, click Start.
  5. Open the SmartVault Drive by completing the following steps:
    1. Click Start > Programs > SmartVault Launch Pad.
    2. If you are not already signed in to your SmartVault account from the SmartVault Desktop software, click the Sign in to your SmartVault account link, type your SmartVault user ID and password, and then click Sign In.
    3. Click SmartVault Drive.
    4. Enter your SmartVault user ID and password again, and then click OK.
You must to post a comment.
Last modified
08:56, 17 Oct 2014

Tags

Classifications

This page has no classifications.