Customer Center
Help Topics
Self-Help Guides
Home > ETC > Knowledge Base and Known Issues > Using the Mapped Drive Diagnostic Tool

Using the Mapped Drive Diagnostic Tool

Table of contents

Overview

2-16-create your SmartVault Drive.PNGThe SmartVault Drive comes with a built in diagnostic tool to ensure it is confirmed to work optimality. If SmartVault detects your Drive settings are not optimal it will display an error and a button that says "correct" next time you attempt to map your SmartVault Drive.

 

 

 

 

 

 

 

 

 

 

2-16 Webdav Diagnostic.PNG

 

Using the Diagnostic: 

If you are not sure your settings are correct disconnect the 

SmartVault Drive by right-click on the system tray icon, and choose "Disconnect"; then right-click again and choose "Map SmartVault Drive".

 

  1. Click the Correct button. The following screen will display a number of settings, with their status.  If your settings are optimal all status should read "OK".
  2. Check each box available, unless you have a reason unrelated to SmartVault to not change these settings. All boxes are selected by default.
  3. Click "OK".

 

Your drive settings should now be optimal.  Proceed to assign a drive letter, input your email and password and connect your drive.  

 

If you ran this diagnostic to correct and error message, and you are still receiving this message, then reset your system and map your drive again. 

You must to post a comment.
Last modified

Tags

This page has no custom tags.

Classifications

This page has no classifications.